FieldAgent Mobile - Single Overlap Mode

FieldAgent Mobile - Overlap Modes

Overview

By default, when flight planning with FieldAgent Mobile, the overlap parameter can be only be modified in increments of five.

In order to provide pilots with maximum flexibility, the Single Overlap Mode will allow the overlap parameter to be modified in single percentage increments to specify the exact overlap necessary.


How To Change Modes

1. Press the settings icon.


2. Select Flight Planning.


3. Select Overlap Mode.
 

4. Select Single. 


5. You can now change the overlap value by increments of 1%.


6. To quickly choose a precise overlap, long press on the overlap value. Enter your desired overlap value in the pop up and press OK.

    • Related Articles

    • FieldAgent - Mobile Stand Count

      Overview The Mobile Stand Count feature for FieldAgent Mobile (iOS app) is intended for quickly processing shareable Stand Count results from the field’s edge. The video below shows it populating in real time: A map result will be shareable ...

    • Changing the Overlap on the Single Sensor

      Note for Bluetooth-equipped products: Single hardware that is equipped with Bluetooth connectivity, either integral to the sensor or via use of the Micro Gimbal product, can configure overlap using the FieldAgent mobile app. If your sensor is ...

    • FieldAgent Mobile - Setting DJI Controller Flight Modes

      Depending on your device, set your DJI controller to the following modes: F Mode: Phantom 3 Series Matrice 100 Omni Inspire 1 P Mode: Phantom 4 Series Inspire 2 Mavic 2 Pro M200/M210/M210RTK M300 Note: Mavic controller should NOT be in Sport Mode ...

    • FieldAgent Mobile - Connecting to Bluetooth

      1. Turn Bluetooth ON. 2. Download, launch, and log into FieldAgent Mobile (iOS App). Need to activate your account? Visit https://fieldagent.sentera.com/activate. 3. Place your drone on a stable surface and power it on. The gimbal will calibrate and ...

    • FieldAgent Mobile - How to set front and side overlap

      When planning a mission in FieldAgent mobile you now have the option to choose separate front and side overlap values. To configure these settings: - Select a field to fly. - Click on the mission plan in the timeline. - Select the preset menu to edit ...