Using Pix4D with the Double 4K Multispectral Sensor

Double 4K - Using Pix4D

Note: Double 4K - Skyport is formerly known as AGX710. 

At the bottom of this page, you'll find instructions and templates to help you use Pix4D with your Sentera Double 4K Sensor. Make sure to download the correct template for your sensor. Using the incorrect template will produce inaccurate results.  If you are not sure what type of sensor you have, contact us at  support@sentera.com   . We will need the model and serial number located on the side of your sensor. 

For RGB Imagery taken with the Sentera Double 4K Sensor, you can use the standard Ag RGB template already in Pix4D.  

To perform calculations manually, use this document. 

    • Related Articles

    • 6X - Multispectral Sensor User and Integration Guide

      Check out our new: 6X User Guide Scroll down to download the user / integration guide below for operating the Sentera 6X Multispectral Sensor. For more information: How to use 6X: ...

    • Double 4K Skyport - Sensor User Guide

      Note: Double 4K - Skyport is formerly known as AGX710. Scroll to the bottom and download the attachment Double 4K Skyport User Manual. In the manual, you will find the following sections: Introduction In the Box Installation Flight Flight Types ...

    • Sentera Sensors - Double 4K, Single, and 6X Multispectral Sensor MAVLink Integration Guide

      Scroll to the bottom of the page to download the Double 4K, Single, and 6X Multispectral Sensor MAVLink Integration Guide. Contact Sentera Customer Support: Create a Support Ticket Here Email: support@sentera.com Phone: (844) 736-8372 - Option "1"

    • Double 4K - Updating Firmware

      Recent versions of firmware for the Sentera Double 4K Sensor (v1.4.0 or later) are required for the Fly Forward Update. Released March 2022. Follow the instructions below for downloading and installing the firmware update for your Double 4K/AGX710 ...

    • Double 4K - Software Release Notes

      Note: Double 4K - Skyport is formerly known as AGX710. Version 1.5.2 | March 30, 2023 Features For S/N's 200+: Add support for Mavic 3E systems (912600 baud U-blox) Add support for U-blox Gen-9 in PHX Inhibit Skyport triggers when operating in non ...