Sentera PHX™ - Compass Calibration

Sentera PHX™ - Compass Calibration

Watch this video for how to do Compass Calibration after starting the calibration procedure inside the Sentera Ground Control software.

After starting the Compass Calibration in Sentera Ground Control, follow the onscreen instructions and listen to the start beep (1 beep) and finish beeps (2 beeps) for each of the 6 sides. Perform the rotations away from any metal objects as shown in this video.

This is how you should hold the vehicle when rotating about the 6 different sides:

Note: This should only be done outside where the aircraft is able to obtain a GPS connection. 

    • Related Articles

    • Sentera PHX™ - Airspeed Calibration

      Step 1: Click the Gear icon within the Fly PHX software. Step 2: Click Sensors under Vehicle Setup. Step 3: Click Airspeed under Sensor Setup. Step 4: Click OK on the right side of the screen to start the calibration. Step 5: Follow the on screen ...
    • Sentera PHX™ - Fly PHX Software

      Fly PHX - Flight Control Application Download the latest version of Sentera's Fly PHX software for the Sentera PHX™ fixed-wing drone. Download Version 1.9.1 Windows Download iOS Download Release Notes: Version 1.9.1 Adds Remote ID Support Updated ...
    • Sentera Fly PHX - Videos To Get You Started

      Watch the following videos in order to understand using PHX: ​ 1. System Overview A brief overview and introduction to the PHX system.  2. Basic Mission Planning Learn how to navigate the Fly PHX mission planning wizard, plan a mission, and save the ...
    • Sentera PHX™ - Protective Film Installation Video

      The video explains how to install transparent film to your PHX to protect it. To purchase the protective film: Download the latest Sentera PHX Operation Manual Sentera PHX Firmware Update
    • Sentera PHX™ - Getting Started with Fly PHX for iPad

      Fly PHX is available for the iPad for the iOS App Store 1.) On your iPad select the App Store icon. 2.) Type in the search bar "Fly PHX" or "Sentera". 3.) Select the Fly PHX icon to download the software. 4.) Turn the CommsBox for your PHX 5.) Open ...