We are constantly working to improve the 65R. Firmware updates will be posted here as improvements are made.
- Download the latest firmware file onto your Microsoft Windows or macOS computer using the link above.
- Install your 65R sensor onto to your drone.
- Connect your computer to your 65R sensor with the supplied USB-C to ethernet adapter.
Power ON your drone to power on your 65R sensor.
The gimbal will stabilize downward and the 4 LEDs on the 65R will illuminate to indicate power.
Click Update Firmware located on the left-hand menu.
Click in the software Update area, as shown below, and navigate to the file you downloaded in step 1, or use the drag-and-drop method.
8. The software update process will begin and may take several minutes. DO NOT TURN OFF THE POWER OR DISCONNECT THE CABLE DURING THIS PROCESS. It may reboot several times during the process.