Reading Single Sensor LED Codes (Model # 21011-00 and up)
The Sentera Single Sensor has 3 LEDs (red, yellow, green) that indicate the status of the camera.
|
LED
|
Status
|
Description
|
Details
|
|
GREEN
|
ON
|
Power Good
|
Camera is powered
|
|
GREEN
|
OFF
|
Power Off
|
Camera is not powered
|
|
YELLOW
|
BLINKING
|
Camera Booting
|
Camera is waiting for valid GPS
|
|
YELLOW
|
ON
|
Camera Ready
|
Camera has valid GPS and is ready for flight
|
|
RED
|
ON
|
Camera Failure
|
Contact Sentera
support for instructions
|
|
RED
|
BLINK
|
Camera Trigger
|
A brief blink will occur for each image capture. This
typically happens in the air and will not be seen by the user.
|
Contact Sentera Customer Support:
Create a Support Ticket Here Phone: (844) 736-8372 - Option "1"
Related Articles
Single Sensor Technical Documentation & Integration Guide
Resources Scroll to the bottom of the page to download the Using Sentera Sensors with MAVLink and Pixhawk document, as well as download these documents below for technical details on the Sentera Singles Sensor and instructions for integrating with ...
FieldAgent Mobile - Single Sensor Gimbal Installation Steps
Installing a gimbal on an Phantom 4 with a previously installed Sentera Single Sensor requires both hardware and software updates. To complete this process, scroll to the bottom of the page to download the three attachments: 1. Single Gimbal - ...
Single Sensor User Manuals
These guides provides basic instruction on Aircraft Setup, Sensor Usage, and Flight Operations. If you need additional information, call Support at Sentera at 612-204-2000. Contact Sentera Customer Support: Create a Support Ticket Here Email: ...
Pix4D - Adding Single Sensor Pix4D Templates (NDVI and NDRE)
The instructions and templates below will help you use Pix4D (Version 4.5.2) with your Sentera Single Sensor. Make sure to download the correct template for your sensor. Using the incorrect template will produce inaccurate results. If you are not ...
DJI - Phantom 4 Series Single Sensor User Manual
Scroll to the bottom of the page for the User Manual for the Sentera Single Sensor mounted on a DJI Phantom 4 Series Drone. This guide will give out basic instruction on Aircraft Setup, Sensor Usage and Flight Operations. If you need addition please ...