6X - GitHub Link for Radiometric Corrections Script

6X - GitHub Link for Radiometric Corrections Script

When using a reflectance panel with the 6X sensor (Reflectance Panel Instructions), raw images should first be run through the Sentera 6X Calibration script.

To download:
Navigate to the Sentera GitHub repository and download py-radiometric-corrections.

To use:
Follow the detailed usage instructions found in the README file.




    • Related Articles

    • 6X - Post Processing with QGIS Sentera Plugin

      When using a calibration panel, raw images should first be run through the calibrations script 6X - GitHub Link for Radiometric Corrections Script 6X imagery can be stitched using either Pix4D or Metashape. Pix4D Processing Instructions Metashape ...
    • 6X - Radiometric Correction Guide

      Scroll down to download the user guide below for radiometric correction on 6X Multispectral imagery.
    • M200/M210/M210-RTK Landing Sensor Calibration

      Downward vision sensor calibration warning: The vision sensors on the Matrice 200 series aid the drone in safe landings and collision avoidance with things like trees and buildings. They can easily get dirty and should be periodically wiped clean. ...
    • 6X - How to Process Data from 6X in Metashape

      Note: This stitching process can be used for all variants of the 6X, including the 6X Thermal. When using a reflectance panel, raw images should first be run through the radiometric corrections script Corrections Script Instructions The following ...
    • Sentera PHX™ - Airspeed Calibration

      Step 1: Click the Gear icon within the Fly PHX software. Step 2: Click Sensors under Vehicle Setup. Step 3: Click Airspeed under Sensor Setup. Step 4: Click OK on the right side of the screen to start the calibration. Step 5: Follow the on screen ...