Remote ID - Compliance Type
Compliance Type
The PHX Remote ID solution is broadcast module compliant.
Declaration of Compliance
What About Standard Remote ID?
Standard Remote ID Compliance for PHX is expected in the future.
Related Articles
Remote ID - General
About Learn more about Remote ID for PHX. Remote ID Checklist The following items need to be completed for Remote ID to be functional on existing PHX Purchase Remote ID add on kit. Install Remote ID add on kit. Update PHX Senthawk (CommsBoard) ...
Remote ID - Is My PHX Remote ID Compliant?
Compliance If your PHX was purchased before September of 2023 your aircraft is not currently compliant. The Remote ID add on kit for PHX needs to be purchased and installed. Compatibility All PHX with a serial number of 2056 or greater are compatible ...
Remote ID - User Guide
About Learn how to use the Remote ID system for the PHX. To use Remote ID for PHX: Remote ID hardware must be installed in the PHX. Fly PHX must be up to date. Senthawk firmware must be up to date. How to Use Open Fly PHX Open Fly PHX on an iPad or ...
Remote ID - Installation Guide
About This guide describes the process to install a Remote ID Add-on kit for the Sentera PHX. Installation Checklist The following items need to be completed for Remote ID to be functional on existing PHX Purchase Remote ID add on kit. Install Remote ...
Remote ID - How Does It Work?
About The Remote ID solution adds a small piece of user installable hardware to the PHX. This hardware is connected to the autopilot and broadcasts the Remote ID information per the FAA regulations of 14 CFR Part 89. What Information Is Broadcast? ...