Remote ID - Is My PHX Remote ID Compliant?

Remote ID - Is My PHX Remote ID Compliant?

Compliance 

If your PHX was purchased before September of 2023 your aircraft is not currently compliant. The Remote ID add on kit for PHX needs to be purchased and installed. 

Compatibility 

All PHX with a serial number of 2056 or greater are compatible with the Remote ID add on kit.  

Aircraft will serial numbers lower than 2056 require (at a minimum) a Long Range Comms upgrade to be compatible with PHX Remote ID hardware. Contact support@sentera.com for more information. 

    • Related Articles

    • Remote ID - Compliance Type

      Compliance Type The PHX Remote ID solution is broadcast module compliant. Declaration of Compliance FAA DOC for PHX What About Standard Remote ID? Standard Remote ID Compliance for PHX is expected in the future.

    • Remote ID: What you need to know

      March 16th, 2024. This is the date that is important for you as a consumer in the United States. As a consumer drone pilot, your drone must comply with Remote ID regulations by March 16th, 2024. The most up to date information on the remote ID laws ...

    • Remote ID - General

      About Learn more about Remote ID for PHX. Remote ID Checklist The following items need to be completed for Remote ID to be functional on existing PHX Purchase Remote ID add on kit. Install Remote ID add on kit. Update PHX Senthawk (CommsBoard) ...

    • Remote ID - User Guide

      About Learn how to use the Remote ID system for the PHX. To use Remote ID for PHX: Remote ID hardware must be installed in the PHX. Fly PHX must be up to date. Senthawk firmware must be up to date. How to Use Open Fly PHX Open Fly PHX on an iPad or ...

    • Remote ID - Installation Guide

      About This guide describes the process to install a Remote ID Add-on kit for the Sentera PHX. Installation Checklist The following items need to be completed for Remote ID to be functional on existing PHX Purchase Remote ID add on kit. Install Remote ...