Sentera Double 4K D4K Sensor Troubleshooting

Double 4K - Sensor Troubleshooting

Note: Double 4K - Skyport is formerly known as AGX710. 

    • Related Articles

    • Double 4K - Updating Firmware

      Recent versions of firmware for the Sentera Double 4K Sensor (v1.4.0 or later) are required for the Fly Forward Update. Released March 2022. Follow the instructions below for downloading and installing the firmware update for your Double 4K/AGX710 ...

    • Double 4K Skyport - Sensor User Guide

      Note: Double 4K - Skyport is formerly known as AGX710. Scroll to the bottom and download the attachment Double 4K Skyport User Manual. In the manual, you will find the following sections: Introduction In the Box Installation Flight Flight Types ...

    • Double 4K - Accessing the Diagnostics Web Pages

      Note: Double 4K - Skyport is formerly known as AGX710. Overview Below are instructions for accessing and using the diagnostics web pages for the Double 4K series cameras. These pages provide access to the following camera features and options, which ...

    • Changing the Overlap on the Single Sensor

      Note for Bluetooth-equipped products: Single hardware that is equipped with Bluetooth connectivity, either integral to the sensor or via use of the Micro Gimbal product, can configure overlap using the FieldAgent mobile app. If your sensor is ...

    • Sentera PHX™ - Accessing the Autopilot SD-Card

      A Sentera technical support representative may ask you to access the autopilot SD-card to download detailed flight logs and statistics. Access the autopilot SD-card Step 1. Remove the tail from the fuselage. Carefully lift the tail up and lay to the ...