FieldAgent Mobile - Setting DJI Controller Flight Modes
Depending on your device, set your DJI controller to the following modes:
F Mode:
- Phantom 3 Series
- Matrice 100
- Omni
- Inspire 1
P Mode:
- Phantom 4 Series
- Inspire 2
- Mavic 2 Pro
- M200/M210/M210RTK
- M300
Note: Mavic controller should NOT be in Sport Mode
Related Articles
FAQ: FieldAgent - Can I perform Tassel Counts with my Mavic or Phantom?
WARNING: Fly at your own risk. There are dangers of flying a drone at lower altitudes. Follow the directions below to carefully plan a safe and effective mission. Yes, tassel counts will work with the DJI Phantom 4 Pro or the DJI Mavic 2 Pro (with ...FieldAgent Mobile - User Guide
FieldAgent® Mobile User Guide English Engineered in Minneapolis, MN, USA April 14, 2022 Doc # 17013 Rev F Copyright © 2022. All rights reserved. Trademark Notice FieldAgent, Double 4K Skyport, and Double 4K are registered trademarks of Sentera. Other ...FieldAgent - Mobile Stand Count
Overview The Mobile Stand Count feature for FieldAgent Mobile (iOS app) is intended for quickly processing shareable Stand Count results from the field’s edge. The video below shows it populating in real time: A map result will be shareable ...DJI - Mavic Pro Single Sensor User Manual
Scroll down to the bottom of the page for the User Manual for the Sentera Single Sensor mounted on a DJI Mavic Pro. This guide will give out basic instruction on Aircraft Setup, Sensor Usage, and Flight Operations.DJI - Phantom 4 Series Single Sensor User Manual
Scroll to the bottom of the page for the User Manual for the Sentera Single Sensor mounted on a DJI Phantom 4 Series Drone. This guide will give out basic instruction on Aircraft Setup, Sensor Usage and Flight Operations. If you need addition please ...