FieldAgent Mobile - Using a Pre-Flight Checklist

• Related Articles

• FieldAgent - Mobile Stand Count

  Overview The Mobile Stand Count feature for FieldAgent Mobile (iOS app) is intended for quickly processing shareable Stand Count results from the field’s edge. The video below shows it populating in real time: A map result will be shareable ...

• FieldAgent Mobile - DJI Flight Plan Export

  Compatible Drones Newer DJI drones, including the Matrice 300, Matrice 350 , and the Mavic 3 Enterprise Series, require missions to be launched with the DJI pro remote controller. This guide will explain how to plan a flight in FieldAgent Mobile (iOS ...

• FieldAgent Mobile - Flying a Field using an Existing Field Boundary (Video)

  Make sure fields are already synced in FieldAgent? Just find the field boundary of the field you would like to fly in the FieldAgent iOS app and swipe to fly! The Video Below will walk you through how to use an existing field boundary to plan out a ...

• FieldAgent Mobile - Setting DJI Controller Flight Modes

  Depending on your device, set your DJI controller to the following modes: F Mode: Phantom 3 Series Matrice 100 Omni Inspire 1 P Mode: Phantom 4 Series Inspire 2 Mavic 2 Pro M200/M210/M210RTK M300 Note: Mavic controller should NOT be in Sport Mode ...

• FieldAgent Mobile - Single Sensor Gimbal Installation Steps

  Installing a gimbal on an Phantom 4 with a previously installed Sentera Single Sensor requires both hardware and software updates. To complete this process, scroll to the bottom of the page to download the three attachments: 1. Single Gimbal - ...