Processing
6X - Thermal Conversion
Why are my images grey? Raw 6X images off the 6X Thermal will appear solid grey when viewed on most basic image viewers (ex. Windows Photo Viewer). Below is an example of a raw 6X image as appears when opened with Windows Default Photo Viewer. ...
6X - Post Processing with QGIS Sentera Plugin
When using a calibration panel, raw images should first be run through the calibrations script 6X - GitHub Link for Radiometric Corrections Script 6X imagery can be stitched using either Pix4D or Metashape. Pix4D Processing Instructions Metashape ...
6X - How to Process in Pix4D
When using a reflectance panel, raw images should first be run through the radiometric corrections script Corrections Script Instructions Stitching in Pix4D To create a new project in Pix4D: 1. Open Pix4D. 2. Create a new project. 3. Enter a Project ...
6X - How to Process Data from 6X in Metashape
Note: This stitching process can be used for all variants of the 6X, including the 6X Thermal. When using a reflectance panel, raw images should first be run through the radiometric corrections script Corrections Script Instructions The following ...
6X - Offloading Imagery
The 6X data is stored on an internal solid-state memory device. Data can be accessed by powering the sensor and connecting a cable to the USB-C port of the side of the 6X. Powering the 6X The 6X Sensor can be powered by the connection from a drone or ...